Wood Stair Company Suffolk County – Look At The Appraisals..

In case you are purchasing a stair with balusters in a contrasting material, like painted balusters on an oak stair, questions will likely arise with regards to the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters fitted once the stair is completed?

Below are a few points to consider with Wood Stair Company: Your painter will generally opt for painting the balusters before installation. This allows them to be sprayed as opposed to brushed and eliminates plenty of “cut-in” work.

Painting balusters separately also means the stair installers will need to come back to the site, remove the railings and install the balusters. You will have charge for this particular “second trip” to the jobsite. You will have to be sure you schedule this “second trip” in coordination using the finishing of the conclusion.

Leaving your balusters out for painting means that they will probably be lost or stolen during this time. You may be accountable for balusters left at the jobsite. After the painted balusters are finally installed, you will see additional “touch-up finishing required in the rail joints. Holes will need to be filled and stain and finish re-applied for the ultimate finish.

Plan installing of your hardwood stair for after your drywall has been taped, sanded, and primed. The drywall process can affect the stair. Drywall mud and paint overspray can make the stair finishing process very difficult and may also make desired results impossible to accomplish.

Most hardwoods are an open grain wood so when dirt gets baked into open grain it is very hard to remove, despite sanding. This can possess a negative effect on the appearance and texture from the finish. Care must also be utilized to guard the stair from dirt and mud.

Never Cover Hardwood Stairs With Plastic. Plastic does not allow airflow, trapping moisture underneath and creating the wood to expand and contract. This expansion and contraction causes the wood joints to open up up and may cause the wood to break into.

The environmental conditions indoors are important to the standard of the stair. Hardwood lumber continues to be dried via a very controlled process for an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the normal home and allows the wood to keep stable under normal conditions.

In cold climates, whenever a house is heated to some high temperature in winter, the environment can become very dry, creating the wood to shrink. This shrinkage will make cracks visible within the wood and joints can start to open up. Subjecting a stair to high amounts of heat is like putting it within an oven and definately will accelerate the deterioration in the stair.

All hardwoods should be sealed on every side to retard movement and protect from contact with elements and damage. It is strongly recommended to seal wood immediately.